Table of Contents
Advertisement
Recording
Changing the start time of the recording
You can change the date and time for starting a recording.
w
Choose the date displayed in the Start: area.
#
Enter the desired date in the format dd:mm:yy
(Day: Month : Year, each two-digit).
w
Choose the time displayed in the Start: area.
#
Enter the required time for starting the recording in the format hh:mm
(Hour: Minute, each two-digit).
Changing the end time of the recording
You can change the end time of a recording.
w
Choose the time displayed in the End: area.
#
Enter the required time for ending the recording in the format hh:mm
(Hour: Minute, each two-digit).
The maximum recording time is limited to 24 hours.
Changing the repeat
You determine whether the recording is to be executed once (single recording) or
repeated at regular intervals (multiple recording).
w x
Select one of the following options in the Repeat: area:
u
Single recording: Choose the Single option if the recording is only to
be executed once.
u
Multiple recording: Choose the Daily, Fortnightly, Weekly or
Monthly option in order to execute the programmed recording
repeatedly at regular intervals.
Changing the storage location
Recordings are stored by default on the integrated hard disk. However, you can also pro-
gramme the recording as a timer for recording with a DVD/VCR device. The DVD/VCR
device must be connected in this case to the VCR SCART port, see "Recording to DVD or
Video Cassette" on page 59.
w x
Choose the desired storage location in the Save: area. The To hard disk
(internal) and External (e.g. DVD recorder) options are available for
selection.
50
Advertisement
Table of Contents
