Hitachi SelecSet 400A User Manual page 40

C 1: A
HAPTER BOUT
Procedure
HCXTD830, Rev. A01, July 2001
Y S S 400A
OUR ELEC ET
To answer a coverage call and send it to the covered
station, follow these steps:
1
Press the appropriate key to answer the call. Your
SelecSet display indicates a coverage call.
2
To send the coverage call to the covered station, press
<ICOM>. The caller is placed in consultation hold,
and the covered station is dialed automatically.
(Consultation hold temporarily removes a party from
the connection so transfer or conference operations
can be performed.)
Note: When sending a coverage call back to the
3
If the station answers, press <JOIN> to connect the
two parties.
4
If the station does not answer, press <CNCL> to
reconnect to the caller.
A
NSWERING
covered station, you may want to remain in the
connection to see if the station answers.
C C
OVERAGE ALLS
1-29