Data Calls - Hitachi SelecSet 400A User Manual

C 2: A
HAPTER DDITIONAL

Data Calls

Using the
<CONV> key
HCXTD830, Rev. A01, July 2001
O
PERATIONS
You can extend a data call to a station by using the
<CONV> (convert) key. Note that the SelecSet 700 and
900 series phone do not support data calling.
1
While talking on a voice call, press the <CONV> key.
The call is placed in consultation hold. (Consultation
hold temporarily removes the party from the
connection so transfer or conference operations can
be performed.)
2
The CAP representing the held call winks slowly.
3
The <CONV> and <JOIN> keys are steadily lit.
4
Dial the desired station number (you can dial your
own station number to extend a data call to yourself).
5
Press <JOIN>. The <JOIN> and <CONV> keys go
dark. (If you are converting/transferring a data call to
yourself, the data lamp should be flashing. Press
<DATA> to answer the call).
6
Press <START> to disconnect.
7
To cancel a voice to data call conversion, press the
winking CAP before pressing <JOIN>.
D C
ATA ALLS
2-57