Sending Pushbutton Tones - Hitachi SelecSet 400A User Manual

C 2: A
HAPTER DDITIONAL

Sending Pushbutton Tones

Using the
<TONE> key
Example
Procedure
HCXTD830, Rev. A01, July 2001
O
PERATIONS
You may need to send pushbutton tones to other types of
telephone equipment. Pushbutton tones are generated by
pressing keys on the keypad while you are connected to
pushbutton-controlled equipment.
To retrieve a message from a voice message system
(VMS), press the <TONE> key while connected to the
VMS to respond to VMS prompts with pushbutton tones.
The VMS may direct you to press P to play your message.
If you have activated the <TONE> key, you can press 7
(labeled PRS). If you have not activated the <TONE> key,
pressing 7 places the VMS in consultation hold and
activates another CAP. When you finish sending
pushbutton tones, press the <TONE> key again.
To send pushbutton tones:
1
Connect to the pushbutton-controlled equipment. (e.g.
voice mail system)
2
Press the <TONE> key. The <TONE> key lights.
3
Generate pushbutton tones by pressing keypad keys.
4
When finish sending pushbutton tones, press the
<TONE> key again.
The <TONE> key/lamp goes out and your console
returns to normal operation. To transfer a call when
the <TONE> key is lit, press <JOIN> before dialing
the desired number. After dialing the number, press
<JOIN> to transfer the call.
S P
ENDING USHBUTTON
T
ONES
2-73