Hitachi SelecSet 400A User Manual page 130

C 2: A
HAPTER DDITIONAL
Radio paging
procedure
Priority radio
paging
HCXTD830, Rev. A01, July 2001
O
PERATIONS
You can use radio paging to send a page to a beeper. Your
system may be equipped with voice radio paging or tone
radio paging. The radio paging key or radio paging access
code works for either type of radio paging.
To use radio paging:
1
Press the radio paging <RPG> key, or dial the radio
paging access code.
2
Dial a beeper identification number (BID).
Note: BIDs are used differently in radio paging than
they are in zone paging or call park. Radio paging
BIDs must be obtained from the communications
manager, since they are determined by the paging
system.
3
To answer a radio page, the user dials the park pickup
access code followed by the BID.
To preempt other radio pages, press the priority radio
paging (PRPG) key or dial the priority radio page access
code. Next, dial the desired BID.
Answering a priority radio page
To answer a priority radio page, the user dials the park
pickup access code, plus the BID.
P
AGING
2-67