Table 1-1 Suggested Programmable Keys - Hitachi SelecSet 400A User Manual

P
ROGRAMMABLE
Suggested
programmable
keys
Key Name
<CALM>
<CLME>
1-12
K
EYS
These features are recommended for attendant operation.
All of these keys must be assigned at the CMAT by your
system administrator.

Table 1-1 Suggested programmable keys

The lamp associated with the combined alarm key lights
when a malfunction is detected in the system, the answer
detection link, the PMS/PMSHOBIC link, or the VMS
link. The CALM lamp stays lit until the problem is
corrected. The CALM lamp indicates the status of the
alarm as follows:
Status
Dark
Lit Steadily
Slow Wink/Flash two or three alarms have occurred
Fast Wink/Flash
When you press the <CALM> key, alarms that are
activated are shown in the LCD as follows:
LCD display
MJ/MN
ANSDET
PMS
VMS
Note: The PMS alarm applies to WelCOMM systems only.
Press <CLME> to send a callme message for and turn on
the message waiting lamp of a called station.
S
Function
Definition
no alarm conditions exist.
one alarm has occurred
all four alarms have occurred
Definition
major/minor system alarm
answer detection link alarm
PMS/PMSHOBIC link alarm
VMS link alarm
HCXTD830, Rev. A01, July 2001
S 400A U
ELEC ET SER
G
UIDE