Setting Valve Run Times - Toro ECx User Manual

Setting Valve Run Times

Turn the control dial to the
position.
Check the
PROGRAMS
reposition the switch to select the desired program.
Zone number 1 will be flashing and its current run
time or OFF will be shown. To select a different zone
number, press the +/
desired zone number is flashing.
Press the button. The run time (or OFF) will
NEXT
begin flashing.
To set the run time, press the +/
ton until the desired run time is shown.
Note: To remove the run time, select OFF by pressing
the +/ and –/ buttons at the same time.
ON OFF
Press the button. The next zone number will
NEXT
begin flashing.
7. Repeat steps and
or remove the run time for the remaining zones .
8. To set the zone run time for another program, repeat
all of the steps starting at step
Return the control dial to the
SET VALVE RUN TIMES
switch setting. If necessary,
or the –/ button until the
ON OFF
or the –/
ON OFF
as needed to set, change,
.
/ position.
AUTO ON
9
AUTO / ON
RAIN
DELAY
OFF
SEASON
ADJUST
SET VALVE
RUN TIMES
but-
2 4 5
PGM A
1 2 3 4 5 6
3
SET TIME / DAY
MANUAL
SET
START
WATERING
DAYS
SET
PROGRAM
START
1 2
TIMES
PROGRAMS
3 5
ON
4 6
NEXT
OFF
3 5
21