Canon MP980 series On-Screen Manual page 848

Frames Are Not Detected Correctly
>
Advanced Guide Troubleshooting
Frames Are Not Detected Correctly
Check 1: Film may be out of position.
See " Placing Film " for details on how to place the film correctly.
Check 2: The film may be extremely dark or bright, or the spaces between
frames are extremely narrow (2 mm is standard).
Follow these steps if thumbnails are not displayed correctly when previewed in ScanGear (scanner
driver). (The following is an example using the Advanced Mode tab. You can also use the Basic Mode
tab.)
1.
(Thumbnail) on the Toolbar.
Click
The whole film image is displayed.
2.
Select the frame that was not displayed correctly.
3.
Select (Enlarge/Reduce) and click on the image.
The Preview area is enlarged.
> Problems with Scanning/Printing Film
> Frames Are Not Detected Correctly
Page 848 of 947 pages