Canon MP980 series On-Screen Manual page 591

Scanning Multiple Documents at One Time in Advanced Mode
>
Advanced Guide Scanning
> Scanning Multiple Documents at One Time in Advanced Mode
ScanGear (Scanner Driver)
Scanning Multiple Documents at One Time in Advanced Mode
You can scan two or more photos (small documents) on the Platen at one time by using Multi-Crop in
Advanced Mode of ScanGear (scanner driver).
Important
The following types of documents cannot be cropped correctly.
- Documents smaller than 1.18 inches (3 cm) square
- Photos that have been cut to various shapes
The following types of documents may not be cropped correctly. In that case, start ScanGear
(scanner driver), then adjust the cropping frame on the Advanced Mode tab and scan again.
- Photos that have a whitish border
- Documents printed on white paper, hand-written text, business cards, etc.
- Thin documents
- Thick documents
Scanning in Advanced Mode
You cannot select this checkbox when Select Source is film.
1.
Place the document on the Platen, then start ScanGear (scanner driver).
Placing Documents
Starting ScanGear (Scanner Driver)
2.
Click Advanced Mode.
The Advanced Mode tab appears.
3.
Click Preview.
Preview image appears in the Preview area.
4.
Click Multi-Crop above the Preview area.
>
Scanning with Other Application Software
> Scanning with Advanced Settings Using
Page 591 of 947 pages