Canon MP980 series On-Screen Manual page 549

Film Dialog Box
>
Advanced Guide Scanning
Dialog Box
Film Dialog Box
Click Scan film & save on the Custom Scan with One-click tab or click Film in the One-click Mode screen
to open the Film dialog box.
Scan Settings
Document Type
Select the type of document to be scanned. When Film(Auto mode) is selected, the film type
(negative or positive) is automatically detected.
Important
Film may not be scanned correctly when Auto Mode is selected. In that case, select the type of
film and scan again.
Color Mode
Select how to scan the document.
Important
Grayscale cannot be selected when Film(Auto mode) is selected for Document Type.
Document Size
35mm Film is displayed.
Resolution
Select the resolution at which to scan documents.
Resolution
Use the scanner driver
Select this checkbox to display the ScanGear (scanner driver) screen and make advanced scan
settings.
Color Mode, Resolution, Document Size and other settings in the Film dialog box will be disabled.
Specify these settings in the ScanGear (scanner driver) screen.
Specify...
> Scanning with the Bundled Application Software
> Film
> MP Navigator EX Screens
Page 549 of 947 pages