Canon PIXMA MP810 Service Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Printer
  5. PIXMA MP810
  6. Service manual

Canon PIXMA MP810 Service Manual

Hide thumbs Also See for PIXMA MP810:
Table of Contents

Advertisement

Quick Links

PIXMA MP810 /
MP960
SERVICE
MANUAL
Canon
Copyright 2006, Canon U.S.A. This technical publication is the proprietary and confidential information of Canon U.S.A. which
shall be retained for reference purposes by Authorized Service Facilities of Canon U.S.A. Its unauthorized use is prohibited.

Advertisement

Table of Contents
loading

Related Manuals for Canon PIXMA MP810

Summary of Contents for Canon PIXMA MP810

  • Page 1 PIXMA MP810 / MP960 SERVICE MANUAL Canon Copyright 2006, Canon U.S.A. This technical publication is the proprietary and confidential information of Canon U.S.A. which shall be retained for reference purposes by Authorized Service Facilities of Canon U.S.A. Its unauthorized use is prohibited.
  • Page 2 PIXMA MP810 / MP960 I. MANUAL OUTLINE This manual consists of the following three parts to provide information necessary to service the PIXMA MP810 / MP960: Part 1: Maintenance Information on maintenance and troubleshooting of the PIXMA MP810 / MP960...

  • Page 3: Table Of Contents

    PIXMA MP810 / MP960 II. TABLE OF CONTENTS Part 1: MAINTENANCE 1. MAINTENANCE 1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer 1-2. Customer Maintenance 1-3. Product Life 1-4. Special Tools 1-5. Serial Number Location 2. LIST OF ERROR DISPLAY / INDICATION 2-1.
  • Page 4 2. CONNECTOR LOCATION AND PIN LAYOUT 2-1. Logic Board 2-2. Carriage Board (Print Head Connector) 2-3. Memory Card Board 2-4. IrDA / PictBridge Board 2-5. Operation Panel Board 3. PIXMA MP810 and MP960 SPECIFICATIONS 4. PRINT MEDIA SPECIFICATIONS <II. TABLE OF CONTENTS>...

  • Page 5: Table Of Contents

    PIXMA MP810 / MP960 TABLE OF CONTENTS Part 1 MAINTENANCE...

  • Page 6: Adjustment, Periodic Maintenance, Periodic Replacement Parts, And Replacement Consumables By Service Engineer

    Part 1: MAINTENANCE TABLE OF CONTENTS 1. MAINTENANCE 1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer (1) Adjustment Approx. Adjustment Timing Purpose Tool time EEPROM initialization - At logic board replacement To initialize settings None. 1 min.

  • Page 7: Customer Maintenance

    (2) Periodic maintenance No periodic maintenance is necessary. (3) Periodic replacement parts There are no parts in this machine that require periodic replacement by a service engineer. (4) Replacement consumables There are no consumables that require replacement by a service engineer. 1-2.

  • Page 8: Special Tools

    *1: Declared yield value in accordance with ISO/IEC FCD24711. Values obtained by continuous printing. *2: When printing Canon standard patterns on 4" x 6" Photo Paper Plus Glossy continuously with the default settings of Photo Paper Plus Glossy using Windows XP printer driver in borderless printing mode and Windows XP Photo Printing Wizard. Declared yield value determined based on Canon standard method referring to ISO/IEC FCD24712.

  • Page 9: List Of Error Display / Indication

    Part 1: MAINTENANCE TABLE OF CONTENTS 2. LIST OF ERROR DISPLAY / INDICATION Errors and warnings are displayed by the following ways: 1) Operator call errors are indicated by the Alarm LED lit in orange, and the error and its solution are displayed on the LCD in text and by icon. 2) Messages during printing from a computer are displayed on the MP driver Status Monitor.

  • Page 10: Service Call Errors

    becomes almost full. 1701] for ink absorber replacement. Press [OK] Adjustment / Settings, (6) Service mode.] to continue printing. Pressing the OK button will exit the error, and enable printing without replacing the ink absorber. However, when the ink absorber becomes full, no further printing can be performed unless the applicable ink absorber is replaced.

  • Page 11: Other Error Messages

    ASF after an error occurred in the ASF cam - ASF_PE sensor board sensor. - Logic board 6 times Internal temperature error [5400] The internal temperature is not normal. - Logic board 7 times Ink absorber full [5B00, The ink absorber is supposed to be full. - Ink absorber kit 5B01] Message on the LCD:...
  • Page 12 Press <>. The Black button was pressed, but it is invalid. A temporary error. Press the Color button to continue the operation. (<>: Color button icon) Press <>. The Color button was pressed, but it is invalid. A temporary error. Press the Black button to continue the operation.

  • Page 13: Warnings

    - Place the sheet in the correct orientation and position. Failed to scan handwriting sheet. Check for The machine scanned the handwritten Photo Index missed and improper markings. Sheet, but markings in the sheet were incorrect. Failed to scan. Either document cannot be The machine failed in scanning the document for Fit- Press the OK button to clear the error.
  • Page 14 - Replace a faulty part, if any. Nothing is displayed on the LCD. - Confirm the connection between the operation panel, the LCD unit, and the logic board. - Replace the - operation panel unit, or - logic board. A portion of the LCD is not displayed. - Perform the button and LCD test in the service mode, and confirm that the The display flickers.
  • Page 15 - print head - Perform print head alignment. Printing is incorrect. Replace the logic board. No ejection of black ink. - Confirm that the ink tanks are installed properly. - Perform print head maintenance. - Replace the - ink tank, or - print head - Remove foreign material from the purge unit caps, if any.

  • Page 16: Repair

    Part 1: MAINTENANCE TABLE OF CONTENTS 3. REPAIR 3-1. Notes on Service Part Replacement (and Disassembling / Reassembling) Service part Adjustment / settings Operation check Notes on replacement Logic board ass'y - Before removal of the logic board After replacement: - EEPROM information print ass'y, remove the power cord, and 1.
  • Page 17 *1: General notes: - Make sure that the flexible cables and wires in the harness are in the proper position and connected correctly. 3-2. Special Notes on Repair Servicing or the Parts Catalog for details. - Do not drop the ferrite core, which may cause damage. - Protect electrical parts from damage due to static electricity.

  • Page 18: Special Notes On Repair Servicing

    Part 1: MAINTENANCE TABLE OF CONTENTS 3-2. Special Notes on Repair Servicing Be sure to protect the machine, especially the LCD, operation panel unit, scanner unit, and logic board, from static electricity in repair servicing. (1) External housing, scanner unit, and document cover (FAU) removal MP810 / MP960: 1) Remove the cassette.
  • Page 19 MP810 MP960 4) Remove the side cover R. (3 screws: 1 on the front, 2 on the rear) MP810 MP960 MP810 1-14...
  • Page 20 MP960 5) Remove the side cover L. (3 screws: 1 on the front, 2 on the rear) MP810 MP960 MP810 MP960 1-15...

This manual is also suitable for:

Pixma mp960

Table of Contents