Canon MP980 series On-Screen Manual page 37

Printing Photos from a Film
Remove the Film Guide from the backside of the FAU Protective Sheet.
(2)
Important
Once the scanning of film has been completed, be sure to store the removed Film Guide
behind the FAU Protective Sheet and reattach the FAU Protective Sheet to the Document
Cover. The FAU Protective Sheet should remain attached when copying or scanning
originals other than films (e.g., documents or photos).
2.
Load the film on the Platen Glass.
Note
Mount the film from left to right in the same direction as the scanning direction. Depending on
the model or brand of your camera, the scanning order may differ from the order of the
exposure of the film.
To prevent the scanned photos from being printed upside down, be sure that the film is loaded
in the proper direction. Load the film so that it is inverted and upside down as shown in the
following figure.
(A) 35 mm film strip
(B) 35 mm slides
To mount 35 mm film strip:
Turn the Film Guide (C) WITH THE SIDE SHOWING THE ILLUSTRATION OF
(1)
FILM FACING UP and open the Film Holder (D) by squeezing the indentations
inward.
Note
Open the Film Holder so that the hinge parts (E) of the Film Guide does not come off the
Film Guide.
Page 37 of 947 pages