Setting The Spot Out; Setting The Screen Mode - Samsung 4 channel DVR User Manual

Setting the Spot Out

You can set the DVR to output information / video apart from the monitor out.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Device> window to
move to <Monitor>, and press [ENTER] button.
2. Select <Spot Out>.

The number of Spot Out terminals differs according to the
model.
3. Use direction buttons ( ◄ ►) to move to a desired
item, and set the value.
• Spot Out 1 : You can select between Auto Sequence, and
Single.
• Set Mode : A window for "Set Spot Out" appears and you
can set the channel for it.
You can set the dwell time between the screen switching in
"Setting the Device > Camera > SEQ-Dwell Time".
(Page 43)
M 
You can setup using the mouse right button in Live screen.
Refer to "Spot Out". (Page 29)
4. When the Spot Out is done, press <OK>.

Setting the Screen Mode

You can configure the Live screen and Split Screens.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Device> window to
move to <Monitor>, and press [ENTER] button.
2. Select <Mode>.
3. Use direction buttons ( ◄ ►) to move to a desired
item, and set the value.
• Live Screen : Select split modes for the Live screen.
4-split screens are included by default.
• Play Screen : Select split modes for the playback screen.
Single screen and 4-split screen are provided by default.
4. When the screen mode setup is done, press <OK>.
Monitor
Spot Out
Monitor Mode
 Spot Out 1
SEQ Set Mode
 Event Display
OFF
OK Cancel
Monitor
Spot Out
Monitor Mode
 Spot Out 1 Set Mode
SEQ
Set Spot Out
 Event Display
OFF
1 2 3
OK
OK Cancel
Monitor
Mode
Monitor Spot Out
Live Screen
Play Screen
Live
OK Cancel
English _47
All
All
4
Play