Connecting The Camera - Samsung 4 channel DVR User Manual

CONNECTING THE CAMERA

Equipped with the IR LED and the illumination sensor, enables you to monitor at night as well as in daytime.
The camera is suitable for both internal and external use.
Name
Camera Fitting
Groove
IR LED
Lens
Illumination Sensor
DVR Connection
Cable
RJ-45 Cable (Length: 18.3m, 60ft)
This cable is specific to UTP connection, which is not compliant with the LAN cable. You can use the UTP
direct cable (all of 8 pins are used) to extend the length to a max of 200m. (based on UTP CAT 5e)
CVBS+
CVBS-
SEB-1005R
Groove that is used to fit the camera bracket.
There are two grooves; one on the top and one on the bottom.
These infrared LED's are controlled by the illumination sensor.
Focal length of 3.6mm enables you to cover relatively longer range of monitoring.
Detects incoming light to control the IR LED.
Connect the cable directly to the DVR without using a particular power cable.
You can use the RJ-45 cable to connect to a remote camera.
12V
GND
N.C GND(AUDIO)
GND 12V
SEB-1007R
Description
1. CVBS+
2. CVBS-
3. AUDIO
4. GND
5. 12V
6. N.C
7. N.C
8. N.C
<Cable pin information provided>
English _15