Remote viewing setup using a dynamic or static ip connection, tzo.com dynamic dns and based on a d-link 4 port wired 804-hv router (23 pages)
Summary of Contents for Samsung SMT-S7800
Page 1
Contact Samsung Electronics U.K. If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Tel : 0330 SAMSUNG (0330 7267864) Web : www.samsung.com/uk...
Page 2
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
SAFETY CONCERNS The purpose of the Safety Concerns section is to ensure the safety of users and prevent property damage. Please read this document carefully for proper use. Conventions Warning Provides information or instructions that you should follow in order to avoid personal injury or fatality.
Warning CAUTION Power Connect your TV to the Set Top Box (STB) after powering off the TV and the STB by pulling out the power plugs. The socket outlet should be installed near the equipment and easily accessible. Installation/Maintenance Install the product correctly complying with the instructions in the user guide.
Package Contents Please make sure the following items are contained in your product package box. Remote Control & Batteries (AAA x 2) Video/Audio Cable SMT-S7800 HDMI Cable User Guide/ Quick Start Guide SCART Cable English _...
Page 11
When you press the STANDBY button ( the STB will switch to Active Standby Mode. After a period of 5 minutes, the STB will switch to Low Power Standby Mode. During normal operation every day, the STB will switch momentarily from Low Power Standby Mode to Upgrade Mode for a moment.
Remote Control This section describes the function of each button on the remote control. Set Top Box (STB) power on/standby Switch the mode to STB Enter numeric values/ characters or change the channel directly Mark points on a timeline Skip/Jump backward Skip/Jump forward STOP PLAY...
Page 15
Entering TV Manufacturer Number Check the ‘TV manufacturer number’ in the ‘Annex’ to see the relevant 3- digit TV manufacturers number, and turn on the TV. (See page 63). Press and hold the TV button ( LED on the remote control blinks. Enter the 3-digit number, and then the LED will blink.
Peripheral Device Connection This section describes how to connect cables and peripheral devices to the STB. Typical device connections are shown in the following figure. You need two cables for a freesat+ installation so that you can watch one channel and record another. You also need a satellite dish with a multiple LNB (which is the protruding antenna of the dish).
Connection to a TV with a SCART Port This section describes how to connect the STB to a TV with a SCART port. Connect the TV SCART port on the rear of the STB to the SCART port of the TV by using a SCART cable.
Connection to a TV/VCR with a Composite Port This section describes how to connect the STB to either a TV or VCR with a Composite (VIDEO/AUDIO OUT) port. Video Connection Using a video cable, connect the VIDEO OUT port on the rear panel of the STB to the VIDEO IN port of the TV/VCR.
Connection to an Audio Receiver or Amplifier This section describes how to connect an audio receiver or amplifier. Using the audio cable, connect the AUDIO port at the rear of the STB to the AUDIO port of an audio receiver or amplifier. English _...
Network Connection This section describes how to connect a residential gateway. Connect the ETHERNET port on the rear panel of the STB with the residential gateway using an Ethernet cable. Ethernet cable A shielded Ethernet cable is recommended. English _...
HOW TO USE THE PRODUCT Installation Wizard Before you can view the television programmes, you must run the installation wizard that starts when the Set Top Box (STB) is first powered up. Step 1 When the product is connected to the TV for the first time the product will display the initial User Settings screen.
Page 29
Step 4 You will see a summary screen after set-up is complete. Select the [Finish] button and press the OK button ( ) to complete the installation. Step 5 The STB will carry out a channel scan in order to find all the freesat channels. English _...
Using the Basic Functions Display icons Icon Definition Favourite channel Lock channel HD channel HD simulcast Paid channel Parental Lock Watch timer Series record timer Record Timer Subtitle available Audio stereo Audio mono AAC sound Icon Definition AAC+ sound Dolby Digital Sound Dolby Digital Plus Sound Audio description DVB Subtitle...
Page 33
Channel List / Favourite Channel Pressing the OK button ( ) on the remote control displays the channel list on the screen. - Pressing the Yellow button allows you to set a favourite channel. Guide You can see the Electronic Programme Guide (EPG) for all channels. Press the GUIDE button ( ) on the remote control whilst watching a programme and select the channel genre.
Video Recording To record TV channels and Radio channels, press the Record button ( You can record a programme not only whilst watching the desired programme, but also after selecting the desired programme from the information banner, the TV guide or the Search menu.
Guide Channel Genre ‘Channel Genre’ allows you to view channels by genre. (e.g. News & Sports, Entertainment, Music, Radio, etc) To use ‘Channel Genre’, follow these steps: 1. Press the MENU button ( remote control. 2. Select the [Guide] category and press the OK button ( ) on the remote control.
Channel Channel You can see the pop-up window of the channel list. - Pressing the OK button ( remote control displays the channel list on the screen. - Pressing the Left/Right buttons ( ) allows you to navigate between channel lists (All Channels, Entertainment, News &...
Library Contents You can see a list of the TV programmes that you have recorded and are recording. - Pressing the INFO button ( remote control displays the programme information of the selected recording. - Pressing the OK button ( remote control will playback the selected content.
Page 43
Library (continued) To lock record, follow these steps: 1. Select the programme. (Only one programme at a time.) 2. Press the TOOLS button ( 3. Select [Lock] on the tools pop-up window. 4. Enter your PIN code. 5. Confirm with the OK button ( To unlock record, follow these steps: 1.
Page 45
Library (continued) To select all records, follow these steps: 1. Press the TOOLS button ( 2. Select [Select All]. 3. Confirm with the OK button ( To deselect all records, follow these steps: 1. Press the TOOLS button ( 2. Select [Deselect All]. 3.
- Before connecting your device to the product, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. - The External HDD device is not supported.
Page 47
Media (continued) You can play contents using a USB storage device. To connect a USB storage device device, follow these steps: 1. Turn on your product. 2. Connect the USB storage device containing photos, music and/or movie files to the USB port at the front/rear of the product.
Page 49
Media (continued) To create a new folder, follow these steps: 1. Press the TOOLS button ( 2. Select [New Folder]. 3. Confirm with the OK button ( 4. Input the name of the folder using the Left/Right/Up/Down ( buttons. 5. Confirm with the OK button ( To sort files, follow these steps: 1.
Page 51
- Rate : allows you to rate videos - Flag Video : add a complaint about a video. * Some content may be not supported because of product limitations. * SAMSUNG does not warrant continuous availability of service. English _...
Page 53
Settings Channel (continued) Parental rating You can set the Parental rating value. - You can choose one from: Adult Only, Unblocked Adult service You can choose whether to use Adult Services . - Visible - Hidden Parental setting You can choose whether to protect your PIN code or not. - Pin code protected - Not protected - The default PIN code is 0000.
Settings Sound (continued) Audio primary You can change the language for the Audio primary. - Select the default language for the Audio primary using the Up/Down button ( Audio secondary You can change the language for the Audio secondary, which is available if an Audio secondary service is provided by the programme provider.
Settings Picture (continued) Information banner timeout Allows you to change the display time for the service information that appears at the top of the screen when you change channels or press the INFO button ( Screen saver You can set the time delay for the screen saver. - If there is no input from the remote control for a given period of time, the menu window disappears.
Settings Library / Media USB auto-open Allows you to automatically open the Media when the USB storage device is connected. Time shift recording Allows you to switch time shift recording auto-start on/off when you change channel. Time shift buffer Allows you to set the time shift buffer duration.
Settings System (continued) Use the Manual IP/DNS configuration when connecting your product to a network that requires a static IP address. To set up the Network manually use the following steps: 1. Connect your product to your LAN. 2. Press the MENU button ( setting] 3.
TROUBLESHOOTING This section describes how to handle the problems that may occur whilst using the STB. If the STB operates abnormally, first check the following: If the problem persists, contact your local service centre. Screen Trouble Nothing appears on the TV screen.
The TV manufacturers and associated numbers that can be supported by a remote control are listed in the table below. Manufacturer Setting Numbers SAMSUNG 001 002 003 004 005 006 007 008 009 010 050 066 076 102 195 217 365 379 421 A.R. SYSTEMS...
Page 73
Dolby Logo Usage Approval Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. DVB Product Notice DVB and the DVB logos are trademarks of the DVB Project. HDMI Product Notice ACCESS Product Notice This product contains NetFront Living Connect of ACCESS CO., LTD.
If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution may be charged. You may also find a copy of the source at http://opensource.samsung.com/ This offer is valid to anyone in receipt of this information.
Page 75
everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations.
Page 77
NO WARRANTY 11) BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Page 79
using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a “work based on the library” and a “work that uses the library”. The former contains code derived from the library, whereas the latter must be combined with the library in order to run.
Page 81
Library, and explaining where to find the accompanying uncombined form of the same work. 8) You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License.
Page 83
The MIT License Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
Page 85
you understand and accept all the terms of this license. 4. Contacts There are two mailing lists related to FreeType: o freetype@nongnu.org Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution. If you are looking for support, start in this list if you haven't found anything to help you in the documentation.
Page 86
2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the defective part. 3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres.
Need help?
Do you have a question about the SMT-S7800 and is the answer not in the manual?
Questions and answers