Event Record Duration - Samsung 4 channel DVR User Manual

Recording Color Tags
Color
White
Orange
Blue
Green
Each press of a selected cell will cycle through <No Recording>-<Continuous>-<Event>-
<Both(Cont&Evnt)>.

Event Record Duration

You can set the beginning and ending point of a recording on an event.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Record> window to
move to <Event Record Duration>, and press [ENTER]
button.
2. Use direction buttons ( ◄ ►) to move to a desired
item, and set the value.
• Pre Event : The recording of an event will start at a
pre-determined time prior to the actual occurrence of the event.
If it is set to 5 seconds, the recording begins from 5
seconds before the event.
• POST Event : The recording will continue for a
pre-determined time after the actual end of an event.
If it is set to 5 seconds, the recording ends in 5 seconds after an event.
3. When the event recording duration setup is done, press <OK>.
REC Quality / Resolution
You can set resolution, fps and quality of recordings by channel, and by recording type of standard / event.
Setting Standard Recording Properties
You can set each channel's resolution, quality and fps for normal recordings.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Record> window to
move to <REC Quality & Resolution>, and press
[ENTER] button.
2. Select <Standard>.
3. When the recording setup is done, press <OK>.
Function
No Recording No schedule / event recording
Continuous Scheduled recording only
Event Event recording only
Both(Cont&Evnt) Both scheduled / event recordings
Description
Event Record Duration
Pre Event  POST Event 
CH

1 OFF

2 OFF

3 OFF

4 OFF
OK Cancel
REC Quality & Resolution
Standard
Event
Remaining count : 4CIF(L) : 2 2CIF(M) : 4 CIF(S) : 8
Resolution  Record Rate 
CH
 
1 CIF(S) 7fps
 
2 CIF(S) 7fps
 
3 CIF(S) 7fps
 
4 CIF(S) 7fps
OK Cancel

1 min

1 min

1 min

1 min
Record Quality 

Level4

Level4

Level4

Level4
English _49