Samsung SCB-3003 User Manual page 34

camera operation
3) Press the set button.
4) Use the Function Setup button to move to a desired letter and select the letter
by pressing the set button. Repeat this to enter multiple letters. You can enter
up to 15 letters.
5) Enter a title, move the cursor to 'POS' and press
the set button. The entered title appears on the
screen. Select the position to display the title on
the screen by using the Function Setup button
and press the set button. When the position
is determined, select 'END' and press the set
button to return to the SPECIAL menu.
M

When the CAM TITLE menu is 'OFF', no title will be displayed on the monitor screen even if you enter one.

and Numbers are available in this mode.

If you move the cursor to CLR and press the set button, all the letters are deleted. To edit a letter,
change the cursor to the bottom left arrow and press the set button. Move the cursor over the
letter to be edited, move the cursor to the letter to be inserted and then press the set button.
SYNC : In areas where the supply is at
60Hz(NTSC), 50Hz(PAL) frequency,
you can synchronize the output
phase of multiple cameras using
the power synchronization func-
tion (Line-Lock) without using a
synchronization signal generator.
- INT : Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock
1) Press the set button.
2) You can select a desired phase from 0 to 359 when select 'phase'.
- EXTERN : The camera can use the external power source frequency for
the synchronization. Regardless of the input voltage the EXTERN MODE is
available only when an external trigger signal input into camera.
M

When using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the L/L type
synchronization.

When the power is DC 12V, the SYNC menu is fi xed to the 'INT' mode.

When using an external input, the signal level must be +3 V (60 Hz ± 0.2). Otherwise, the
camera may malfunction and/or become damaged.
34_ camera operation
FRONT DOOR
SYNC
PHASE
Press SET to Return
0