Table of Contents
Advertisement
camera operation
White Bal (White Balance)
Use the White Balance function to adjust the screen color.
1.
When the SETUP menu screen is displayed,
select 'White Bal' by using the Function
Setup button so that the arrow indicates
'White Bal' .
2.
Select a desired mode using the Function
Setup button.
Select one of the following 5 modes, as appropriate for your purpose.
ATW : Select this when the color temperature is between 2,400˚K and 10,500˚K.
OUTDOOR : Select this when the color temperature is between 1,700˚K and 11,000˚K.
(sodium light inclusion) Select this When the color temperature of environment
surrounding the subject is out of the control range (e.g. clear sky, or sunset)
INDOOR : Select this when the color temperature is between 4,500˚K and 8,500˚K.
MANUAL : Select this to fi ne-tune White Balance manually. Set White Balance fi rst by using
the ATW or AWC mode. After that button to MANUAL mode, fi ne-tune the
White Balance and the Function Setup button.
AWC SET : To fi nd the optimal luminance level for the current environment, point the
camera towards a sheet of white paper and press the set button. If the
environment changes, readjust it.
M
White Balance may not work properly under the following conditions. In this case select the
OUTDOOR mode.
1)
When the ambient illumination of the subject is dim.
2)
If the camera is directed towards a fl uorescent light or is installed in a place where illumination
changes dramatically, the White Balance operation may become unstable.
26_ camera operation
MAIN SETUP
1. LENS
DC
2. EXPOSURE
3. WHITE BAL
ATW
4. BACKLIGHT
OFF
5. SSNR3
ON
Advertisement
Table of Contents
