Samsung SCB-3003 User Manual page 15

Lens
The lens is not supplied with this camera. Purchase a lens suitable for your environment.
This camera accepts the auto iris lens and both C-and CS-mount lens.
r.
N
M

To use the functions of this camera effectively it is recommended that a DC type Auto Iris lens is used.

Keep the lens surface clean, if it becomes contaminated with dirt or fi ngerprints the picture quality suffers.
When Using Auto Iris Lens
1. Strip the insulation of the auto iris lens cable 8mm from the end.
2. Strip the insulation of the core of the auto iris lens cable to expose a 2mm
length.
3. Remove the cover of the auto iris lens connector plug and solder the lens cable
to the connector pin of the plug.
Pin No. DC
No.1 Pin Damping -
No.2 Pin Damping +
No.3 Pin Drive +
No.4 Pin Drive -
approx. 8mm
approx. 2mm
LENS
VIDEO
Red (power)
No.3 Pin
No.1 Pin
NC
White (video signal)
Black (GND)
Lens cable
Connector
No.4 Pin
No.2 Pin
English_15