Table of Contents
Advertisement
camera operation
DAY/NIGHT
You can display pictures in color or in black and white.
1.
When the SETUP menu screen is displayed,
select 'DAY/NIGHT' by using the Function
Setup button so that the arrow indicates
'DAY/NIGHT'.
2.
Select a desired mode using the Function
Setup button according to the picture
display you want.
AUTO : The mode is switched to 'Color' in a
normal environment, but switches to 'B/W' mode
when ambient illumination is low. To set up the
switching time for AUTO mode, press the set
button. You can turn on or off the burst signal on
B/W mode.
-
DURATION : You can select the day/night
-
DWELL TIME : You can select day/night
Fast
Slow
The day/night switching point of the camera can be adjusted.
EXTERN : Ground to the grounding terminal to allow automatic switching between
COLOR and B/W (Black/White).
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
M
When using a Video Auto Iris Lens, if you set the lens level to low, automatic switching between
Color and Black & White may not occur.
If the GAIN of EXPOSURE menu is set to OFF, AUTO mode is not available to select.
When using an external input, Connect the D & N Input Port to the Ground Terminal.
30_ camera operation
switching point.
switching delay time from.
3s, 5s, 7s, 10s, 15s,
20s, 30s, 40, 60s
Color
B/W
2.5 lux
1 lux
MAIN SETUP
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. SSNR3
6. DAY/NIGHT
AUTO
7. PROFILE
BASIC
8. SPECIAL
9. EXIT
AUTO SETUP
▶ 1.BURST MODE
2.COLOR→B/W
DURATION
DWELL TIME
3.B/W→COLOR
DURATION
DWELL TIME
4.RETURN
B/W
Color
5 lux
7 lux
DC
ATW
OFF
ON
SAVE
ON
FAST
5 SEC
FAST
10 SEC
Advertisement
Table of Contents
