Table of Contents
Advertisement
)
M
When you use a DC lens, set the shutter mode to --- if color rolling occurs.
When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the picture
may become unstable if the camera faces a bright fl uorescent light. Therefore, take care when
choosing the installation position.
When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
When using an external input, Connect the Shutter Speed Select Terminal to the Ground
Terminal.
AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but
-
HIGH : Allows automatic gain control from 5.3dB to 42dB.
-
OFF : Deactivates the AGC function.
-
LOW : Allows automatic gain control from 5.3dB to 32dB.
SENS-UP : When it is night or dark, the camera automatically detects the light level and
maintains a clear picture if this mode is activated.
-
OFF : Deactivates the SENS-UP function.
-
AUTO : Activates the SENS-UP function.
M
If you set the Function Setup button to 'AUTO' mode, You can adjust the brightness by
increasing or decreasing the shutter speed. (x2 ~ x512)
Note that the higher the zoom level, the brighter the screen, but the more likely it is that an
after-image will appear.
Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation when the zoom
level is increased, this is normal.
If GAIN of EXPOSURE is not in use, the SENS-UP (Sensitivity-Up) is set to "---".
RETURN : Return to the SETUP menu.
the greater the noise.
English_25
Advertisement
Table of Contents
