Alarm States; Miscellaneous - Bosch MIC IP PSU User Manual

56 en | Configuration using a Web browser
4.
5.
4.28.4

Alarm States

This page identifies the status of each alarm set in the system.
4.29

Miscellaneous

Password
Enter a password for the encoder.
Address
Allows the appropriate camera to be operated via the numerical address in the control
system. Type a number between 0000 and 9999, inclusive, to identify the camera.
Reset to Factory Defaults
F.01U.265.804 | 1.6 | 2012.08
Select the output option:
– None: no defined command.
– Alarm Relay: defines a physical connection from the open collector alarm output.
– Aux On: defines a standard or custom keyboard ON command.
Note: Only commands 1, 8, 18, 20, 43, 60, 80, 86 are supported. Support for the
remaining commands is scheduled for a future release.
– Aux Off: defines a standard or custom keyboard OFF command.
Note: Only commands 1, 8, 18, 20, 43, 60, 80, 86 are supported. Support for the
remaining commands is scheduled for a future release.
– Shot: defines a preset scene from shot 1-99.
– Transmit: Transmits a message back to the head end (available with RS-232 serial
and Bilinx connections).
Select the Output period, which controls the length of time the output relay is activated:
– Follow: Alarm output will remain activated for the same amount of time the alarm
input is activated
– Latched: Alarm stays on until the operator clears it.
User Manual
MIC Series IP Power Supply
Bosch Security Systems, Inc.