Configuration Menu - Bosch MIC IP PSU User Manual

30 en | Configuration using a Web browser
4.2

Configuration menu

The SETTINGS page provides access to the configuration menu, which contains all the unit's
parameters arranged in groups. You can view the current settings by opening one of the
configuration screens. You can change the settings by entering new values or by selecting a
predefined value from a list field.
There are two options for configuring the unit or checking the current settings:
–
–
In Basic Mode the most important parameters are arranged in seven groups. This allows you
to change the basic settings with just a few entries and then put the device into operation.
Advanced Mode is recommended for expert users or system support personnel. You can
access all device parameters in this mode. Settings that affect the fundamental functionality
of the device (such as firmware updates) can only be altered in Advanced Mode.
All parameter groups are described in this chapter in the order in which they are listed in the
configuration menu, from the top of the screen to the bottom.
CAUTION!
The settings in the Advanced Mode should only be processed or modified by expert users or
system support personnel.
All settings are backed up in the encoder memory so they are not lost even if the power fails.
The exception is the time settings, which are lost after 72 hours without power if no central
time server is selected (see Section 4.4 Basic Mode: Date/Time, page 32).
Starting configuration

F.01U.265.804 | 1.6 | 2012.08
Basic Mode
Advanced Mode
Click the SETTINGS link in the upper section of the window. The Web browser opens a
new page with the configuration menu.
User Manual
MIC Series IP Power Supply
Bosch Security Systems, Inc.