Simultaneous Ip And Analog Video/Control ("Hybrid" Operation); Assign An Ip Address - Bosch MIC IP PSU User Manual

26 en | Installation
3.9 Simultaneous IP and Analog Video/Control ("Hybrid"
Operation)
The figure below illustrates how to configure your system to achieve simultaneous video and
control over both IP and analog connections.
Figure 3.15 System configuration for simultaneous video/control
Number Description
1
2
3
4
5
3.10

Assign an IP Address

Assign an IP address to the encoder. The encoder must have a valid IP address for your
network and a compatible subnet mask before you can operate it within your network.
1.
2.
3.
4.
F.01U.265.804 | 1.6 | 2012.08
Connection between MIC camera and BNC T-connector in BNC socket on PCB in
MIC IP PSU
Connection between BNC T-connector and encoder in MIC IP PSU
Connection between BNC T-connector and Bilinx-based control (head-end) system
Connection between encoder and Local Area Network (LAN) (or the "cloud")
Connection between the Local Area Network (LAN) (or the "cloud") and PC
connected to video monitor
If you have not already done so, install the Configuration Manager program from the
product CD.
Start Configuration Manager. The system automatically searches the network for
compatible units.
If the encoder is displayed in the list, right-click the entry, then select Device Network
Settings... from the popup menu that appears.
In the Device IP address field, enter the required IP address (for example 192.168.0.100)
and click OK. The encoder reboots and the IP address is valid.
Bilinx
User Manual
MIC Series IP Power Supply
Bosch Security Systems, Inc.