Mic Power Supply Units (Psus) For Non-Ir Mic Cameras - Bosch MIC IP PSU User Manual

14 en | Installation
3.3

MIC Power Supply Units (PSUs) for Non-IR MIC Cameras

The figure below displays the layout of the PCB in the MIC PSUs for non-IR cameras, with call-
out numbers to the side of or below the connection/terminal ID or the terminal, and 'on' the
fuses. The table below the figure identifies the connections.
Figure 3.3 Layout of PCB in enclosure of PSU for non-IR MIC cameras
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
F.01U.265.804 | 1.6 | 2012.08
Connection /
Terminal ID on PCB
HD1 AC Power input
HD3 Shielded composite cable
(analog connections to camera)
HD5 RS-485 control
HD4 USB to RS-485 converter
HD8 **NOT USED**
HD6 [Optional] Auxiliary, heater
HD7 Video (composite cable)
HD2 Tamper switch
CN3 (Video Switched) Coax connection
CN1 (Video Out) Coax connection
CN2 Auxiliary card header
Earth Link Earth Link
FS2 Fuse 2 - Primary protection
FS1 Fuse 1 - MIC camera protection --
FS3 Fuse 3 - Heater protection 1
FS5 Fuse 5 - Heater protection 2
User Manual
Description/Function of
Connection / Terminal
MIC Series IP Power Supply
Type of Connection /
Terminal
Screw terminal
Screw terminal
Screw terminal
Molex connector
Molex connector
Screw terminal
Screw terminal
Screw terminal
BNC socket
BNC socket
Plug in
--
--
--
--
Bosch Security Systems, Inc.