Video Input; Advanced Mode: Encoder; Picture Settings - Bosch MIC IP PSU User Manual

MIC Series IP Power Supply
2.
Save system log
Check this option to save system messages in a text file on your local computer.
You can then view, edit and print this file with any text editor or the standard Office software.
File for system log
1.
2.
4.17

Video Input

You can activate the 75 Ohm terminating resistance for the video input of the encoder. The
terminating resistance must be deactivated for the video signal to be looped through. Every
video input is closed at the time of delivery.
75 Ohm termination
Select Off if the video signal is to be looped through.
4.18

Advanced Mode: Encoder

4.19

Picture Settings

You can set the video image of the camera to suit your requirements. The current video image
is displayed in the small window next to the slide controls as confirmation. Your changes are
effective immediately.
1.
2.
Contrast (0...255)
You can use this function to adapt the contrast of the video image to your working
environment.
Saturation (0...255)
You can use this function to adjust color saturation in order to correct unnatural camera signal
colors.
Bosch Security Systems, Inc.
If necessary, click Browse to find a suitable directory.
Enter the path for saving the system log here.
If necessary, click Browse to find a suitable directory.
Move the slide control to the required position.
Click Default to reset all settings to their default values.
User Manual
Configuration using a Web browser | en
F.01U.265.804 | 1.6 | 2012.08
43