Dell PowerConnect W-Airwave Configuration Manual page 70

Table 11 Captive Portal Auth Profile Settings
Field
Folder
Name
Referenced Profiles
Server Group
Other Settings
Default Role
Redirect Pause
(0-60 sec)
User Login
Guest Login
Logout Popup
Window
Use HTTP
Authentication
Logon Wait Minimum
Wait (1-10 sec)
Logon Wait
Maximum Wait
(0-10 sec)
Logon Wait CPU
Utilization Threshold
(0-100 sec)
Max Authentication
Failures
Show FQDN
Use CHAP
(Non-standard)
Sygate-on-demand-
agent
Login Page
Welcome Page
70 | Aruba Configuration Reference
Default Description
Top Use this field to set and display the folder with which the profile is
associated. The drop-down menu displays all folders available for
association with the profile.
Folders provide a way to organize the visibility of device parameters
that is separate from the configuration groups of devices. Using
folders, you can view basic statistics about device, and define which
users have visibility to which device parameters.
Blank Enter the name of the Captive Port Authentication profile.
default Enter the name of the internal VPN authentication server group, or the
server group that performs 802.1x authentication.
default Role assigned to the Captive Portal user upon login. When both user
and guest logon are enabled, the default role applies to the user
logon; users logging in using the guest interface are assigned the
guest role. The Policy Enforcement Firewall license must be installed.
10 Time, in seconds, that the system remains in the initial welcome page
before redirecting the user to the final web URL. If set to 0, the
welcome page displays until the user clicks on the indicated link.
Yes Enables Captive Portal with authentication of user credentials.
No Enables Captive Portal logon without authentication.
Yes Enables a pop-up window with the Logout link for the user to logout
after logon. If this is disabled, The user remains logged in until the
user timeout period has elapsed or the station reloads.
No Use HTTP protocol on redirection to the Captive Portal page. If you
use this option, modify the captive portal policy to allow HTTP traffic.
5 Minimum time, in seconds, the user will have to wait for the logon
page to pop up if the CPU load is high. This works in conjunction with
the Logon wait CPU utilization threshold parameter.
10 Maximum time, in seconds, the user will have to wait for the logon
page to pop up if the CPU load is high. This works in conjunction with
the Logon wait CPU utilization threshold parameter.
60 CPU utilization percentage above which the Logon wait interval is
applied when presenting the user with the logon page.
0 Maximum number of authentication failures before the user is
blacklisted.
No Allows the user to see and select the fully-qualified domain name
(FQDN) on the login page.
No Use CHAP protocol. You should not use this option unless instructed
to do so by an Aruba representative.
No Enables client remediation with Sygate-on-demand-agent (SODA).
/auth/index.html URL of the page that appears for the user logon. This can be set to
any URL.
/auth/ URL of the page that appears after logon and before redirection to the
welcome.html web URL. This can be set to any URL.
AirWave Wireless Management Suite | Configuration Guide