Dell PowerConnect W-Airwave Configuration Manual page 25

Figure 14 Groups > Basic Page Illustration (Partial Display)
2. Authorize Aruba controllers into the AMP Group.
When authorizing the first controller onto a group, you must add the device in monitor-only mode. Otherwise,
!
AWMS removes the configuration of the controller before you have a chance to import the configuration, and this
would remove critical network configuration and status.
CAUTION
Aruba Configuration is enabled by default in AWMS.
N O T E
3. Navigate to the
Aruba controller configuration file.
device is mismatched.
Figure 15 APs/Devices > Audit Page Illustration
AirWave Wireless Management Suite | Configuration Guide
AP/s/Devices > Audit
page for the first controller to prepare for importing an existing
Figure 15 illustrates the information available on this page if the
Aruba Configuration in AWMS | 25