Dell PowerConnect W-Airwave Configuration Manual page 139

Table 54 Aruba Configuration > Profiles > SSID > 802.11K Profile Settings
Field
General Settings
Folder
Name
Other Settings
Measurement Mode for
Beacon Reports
Advertise 802.11K
Capability
Forcefully
Disassociate On-hook
Voice Clients
3. Click
AirWave Wireless Management Suite | Configuration Guide
Default
Top
Blank
beacon-table
No
No
Add Save
or . The added or edited profile appears on the
Description
Use this field to set and display the folder with which the profile is
associated. The drop-down menu displays all folders available for
association with the profile.
Folders provide a way to organize the visibility of device parameters
that is separate from the configuration groups of devices. Using
folders, you can view basic statistics about device, and define which
users have visibility to which device parameters.
Enter the name of the profile.
Click the Measurement Mode for Beacon Reports drop-down menu
and specify one of the following measurement modes:
active—Enables active beacon measurement mode. In this mode,
the client sends a probe request to the broadcast destination
address on all supported channels, sets a measurement duration
timer, and, at the end of the measurement duration, compiles all
received beacons or probe response with the requested SSID and
BSSID into a measurement report.
beacon-table—Enables beacon-table beacon measurement
mode.In this mode, the client measures beacons and returns a
report with stored beacon information for any supported channel
with the requested SSID and BSSID. The client does not perform
any additional measurements.
passive—Enables passive beacon measurement mode. In this
mode, the client sets a measurement duration timer, and, at the end
of the measurement duration, compiles all received beacons or
probe response with the requested SSID and BSSID into a
measurement report.
NOTE: If a station does not support the selected measurement mode,
it returns a Beacon Measurement Report with the Incapable bit set in
the Measurement Report Mode field.
Select this option to allow Virtual APs using this profile to advertise
802.11K capability. This feature is disabled by default.
Select this option to allow the AP to forcefully disassociate on-hook
voice clients (clients that are not on a call) after period of inactivity.
Without the forced disassociation feature, if an AP has reached its call
admission control limits and an on-hook voice client wants to start a
new call, that client may be denied. If forced disassociation is enabled,
those clients can associate to a neighboring AP that can fulfil their QoS
requirements. This feature is disabled by default.
802.11K
page, and on the details page.
Aruba Configuration Reference | 139