Step 9: Connect And Configure Options - NEC Express5800/320Fd-LR User Manual

Step 9: Connect and Configure Options

If there is any optional PCI board or peripheral equipment to connect to NEC Express5800/ft series,
turn off the power of NEC Express5800/ft series, and connect it according to the "PCI board" in
User's Guide and the device's instruction.
IMPORTANT:
If there is any option, PCI board or peripheral equipment that has been purchased other than by
"build to order", connect it.
When a LAN card or disk is added, dual configuration is required. For details of the procedures, see
the chapter 4 "Step C-1: Set Dual LAN Configuration" of this document and the following "Step
C-2: Set Dual Disk Configuration"
Linux Setup 4-37