NEC Express5800/320Fd-LR User Manual page 59

IMPORTANT:
Connection of optional devices
In the case of standard configuration, you need to complete setup of the operating
system before mounting optional PCI cards or hard disks that you purchased
separately.
If N8803-035 is mounted, be sure to connect cables to the FC array unit before going
on to the next step.
LAN port
(VTM)
(Connect
only when using
the ft Remote
USB connection
Management
modem
Card)
USB floppy disk
drive
Hub
(multiport repeater)
To a 1000Mbps network
Keyboard
(via keyboard hub to
USB mouse)
Back of
the device
Serial Interface
Connect the device with the
serial interface
(This cannot be used since it is
for maintenance.)
Installing Server 3-19
Display
AFTER every peripheral device is
connected, insert the power cord
into a socket. the outlet.