NEC Express5800/320Fd-LR User Manual page 86

4-26 Linux Setup
Execute the command below to activate the combined interface that has been constructed.
3.
# vndctl up 3
Execute the command below to check the status of the combined interface that has been
4.
constructed.
# vndctl status
--Virtual Network Status--
BondingDevice Slot Status InetAddress RXErrors TXErrors Collisions
bond0
bond1
bond2
bond3
bond4
Slot
1 top
bottom eth110200
2 top
bottom eth110201
3 top
bottom eth110600
4 top
bottom -
5 top
bottom -
6 top
bottom -
7 top
bottom -
8 top
bottom -
When bond2 (bond 0 and bond 1 are configured by default.) is configured for the slot 3 and as
shown above, and the status of each SLAVE interface (eth100600,eth110600) is DUPLEX,
duplication is successfully completed.
Note:
Follow the steps below to delete the dual LAN configuration.
Execute the command below to stop the combined interfaces corresponding to the slot
1.
number <slot>.
# vndctl down <slot>
Execute the command below to delete the combined interfaces corresponding to the slot
2.
number <slot>.
# vndctl del <slot>
1 ONLINE -
2 ONLINE -
3 ONLINE 192.168.0.1
OFFLINE -
OFFLINE -
RealDevice Status
eth100200 DUPLEX UP
DUPLEX UP
eth100201 DUPLEX UP
DUPLEX UP
eth100600 DUPLEX UP
DUPLEX UP
-
-
-
-
-
0
0
0
0
0
Interface LinkState LinkSpeed
LINK
LINK
LINK
LINK
LINK
LINK
0 0
0 0
0 0
0 0
0 0
1000Mb/s-FD
1000Mb/s-FD
1000Mb/s-FD
1000Mb/s-FD
1000Mb/s-FD
1000Mb/s-FD