NEC Express5800/320Fd-LR User Manual page 91

<Explanation of items>
Name Name of the software RAID device
Partition Mount point
When this is blank, it means the partition is not mounted as a file system.
Label Volume label of the the ext2/ext3 file systems.
Member The information on members that constitute RAID is displayed in the format
of "(slot number) name". If there is an error and the member is out of the
RAID, "F" is displayed on the left.
Status Status of RAID devices. See the following for indications:
Status
DUPLEX
SIMPLEX
RECOVERY(XX.X%)
RESYNC(XX.X%)
CHECK(XX.X%)
REPAIR(XX.X%)
RESYNC
Repairing disk automatically (disk scrubbing)
This function routinely checks the consistency of duplexed data in each block on hard disk drive
and repairs the data automatically when inconsistency is found. This works "Every Sunday, 4:22
AM" as default just after purchasing NEC Express5800/ft or reinstalling OS. Execute ftdiskadm to
change the default setting. The following describes how to change the setting.
IMPORTANT:
You must execute the following operations as root user.
"-" is displayed when there is no label.
It is duplicated successfully.
Only one RAID is incorporated.
A member that is not incorporated is not displayed.
If so, repairing is required.
It is in the process of reconfiguring (resynchronizing) the devices
that are out of / illegal
When it is done, "DUPLEX" is displayed.
It is in the process of recalculating RAID.
It is in the process of checking data consistency.
It is in the process of checking/repairing data consistency.
It is on standby for recovery or synchronization.
When "R" is added to Member column, the member is on standby
for recovery.
Meaning
RAID configuration.
Linux Setup 4-31