NEC Express5800/320Fd-LR User Manual page 80

4-20 Linux Setup
Install java-1.5.0-sun.
3.
# rpm -ivh --nosignature /mnt/Supplimentary/java-1.5.0-sun-1.5.015-1jpp.2.el5.x86_64.rpm
Enter the below command and unload the Red Hat Enterprise Linux Advanced Platform 5.2
4.
Supplementary CD from the optical disk drive.
# eject
Enter the below command to confirm whether all the RAID devices are synchronized.
5.
(If they are in the middle of resync process, wait until the process completes before you move on
to the next step.)
# cat /proc/mdstat
Set the NEC EXPRESSBUILDER DVD on the optical disk dive.
6.
Enter the command described below and mount the DVD.
7.
The mount point is described as /mnt here.
# mount /dev/hda/mnt
Install ft Server Control Software.
8.
(a) Install the package.
# /mnt/001/lnx/ftsys/install.sh
(b) After the installation, "Enter YES to reboot now or NO to allow a manual reboot later :
[YES]" is displayed. Press <Enter>.
Restart the OS.
9.
CHECK:
While creating the /usr partition, a message "logger: command not found" is
displayed on the console when restarting the OS. This message affects nothing on the
system.