3-8 Windows Setup and Operation
6.
On the left tree of RDR Utility, right-click a disk to set RDR and click [Add physical
Disk To RDR Virtual Disk].
7.
Confirm that synchronizing disks are started and the DISK ACCESS LEDs and the
display of RDR utility change as shown below:
Synchronizing
Source disk
Destination disk
RDR Virtual Disk
IMPORTANT:
The time required for synchronization varies depending on the partition size on the disk.
DISK ACCESS
LED
Amber
(Blinking)
Amber
(Blinking)
RDR Utility
Op State: State
Simplex
Syncing
Simplex
(x=0, 10, 20, ..., 90)
Status
Resync x percent