6.
Open the levers on both sides of the
socket of the DIMM to be
removed. Press down on the levers to
be unlocked and remove the DIMM.
7.
Attach the memory duct.
8.
Attach the top cover of the CPU/IO module and secure it with screws.
9.
Refer to page 8-14 and install the CPU/IO module.
10.
Connect the power cords.
11.
Press the POWER switch to power on the server.
12.
Verify that POST displays no error message.
If POST displays an error message, write it down and see the POST error message list on page
7-4.
System Upgrade 8-23