NEC Express5800 Series User Manual page 58

2-28 General Description
DVD-ROM drive
NEC Express5800/320Fc series has a DVD-ROM drive it is a device used to read data from an optical
disk (compact disc read-only memory). Compared to a floppy disk, an optical disk allows for larger
capacity and higher data rate.
Insert/Remove DVD-ROM
Follow the steps below to load an optical disk.
1.
Before you insert an optical disk, make sure that the
server is powered on.
2.
Press the tray-eject button located in the front of the
DVD-ROM drive to open the CD tray.
3.
Hold the optical disk with its signaling side facing the
tray.
4.
As shown in the figure on the right, place the optical
disk on the tray and press lightly on the center to lock.
5.
Push the front side of the tray gently to the drive-
closed position.