NEC Express5800 Series User Manual page 168

5-22 Installing and Using Utilities
Supplement
Note the followings when using NEC ESMPRO Agent.
Application log registered when system starting
About the event of "Source: Perflib
When system is starting, Perflib log may be registered to the application log.
The detailed information about an event log is described on Microsoft Product Support
Services. Please check the contents.
– [INFO] Events for Performance Monitor Extensions
http://support.microsoft.com/default.aspx?scid=kb;en-us;226494
– Application Log Events Generated When You Start Performance Counter Query
http://support.microsoft.com/default.aspx?scid=kb;en-us;296187
– Event ID 2003 Warning Message Logged When Loading Performance Counters
http://support.microsoft.com/default.aspx?scid=kb;en-us;267831
Visit the Microsoft Help and Support on regular basis where you can find other
information than the above at http://support.microsoft.com/default.aspx?LN=en-us.
Maintenance-related Functions
When you want to use maintenance-related functions of the NEC Express5800/320Fc series,
contact your maintenance personnel.
CPU Information
If you select one of the [CPU Module] – [CPU] in the [ft] tree of the data viewer, unknown or
incorrect information appears in some of the information items. The CPU information can be
viewed by selecting [System] – [CPU] in the [ESMPRO] tree.
Status during CPU Module Diagnosis
While diagnosing a stopped CPU module, the CPU is no longer in the duplex mode and the CPU
and the memory cannot be used. However, the status of [CPU] and [DIMM] displayed under [CPU
module] in the ft tree on a Data Viewer becomes "Online" and the status color becomes green.
Change of Installation States of CPU and PCI Modules
If you dynamically change the configuration of the CPU or PCI module in the relevant system
during review of the server information by using the data viewer, the message prompting you to
reconstruct the tree of the data viewer will appear. If you click the [Yes] button, the tree is
reconstructed in the data viewer to reflect the change of the system configuration on the data viewer.
Clicking the [No] button does not cause the tree to be reconstructed in the data viewer. If so, the
information in the data viewer may be different from the current system information because the