NEC Express5800 Series User Manual page 59

To remove the optical disk, press the tray-eject button as you did
in inserting the optical disk.
When the access LED illuminates in orange, it indicates the
optical disk is being accessed. Make sure the access LED is not
illuminating in orange before you press the tray-eject button.
Press the locking part in the center of the tray and pick the optical
disk gently. When you have removed the optical disk, push the
tray to the drive-closed position.
When you cannot eject a CD-ROM
Use the following steps when you cannot eject the optical disk from the server by pressing the eject
button:
1.
Press the POWER switch to power off this server (i.e. the POWER LED is off).
2.
Use a metal pin of about 1.2 mm in diameter and
100 mm long (alternatively, you can use a fairly
large paper clip after straightening). Insert it gently
into the manual release hole located at the low front
side of the server until the tray is ejected.
IMPORTANT:
Do not use a toothpick, plastic pin, or other

breakable objects.
If you cannot eject the CD-ROM by following

the steps above, contact your sales agent.
3.
Hold the tray and pull it out.
4.
Take out the optical disk.
5.
Push the tray back.
General Description 2-29