External control
4) "Cumulative irradiation time (×100hrs)"... To set the cumulative irradiation time
(*During setting "Cumulative irradiation time (×100hrs)" is highlighted.)
・Read
・Write
・Cancel
[Settings 2]
1) "Set MODE"... To switch the mode of the controller
(*While changing mode settings, the modes, "TEMP," "OUTPUT," and "Buzzer OFF" are highlighted.)
・[TEMP]
・[OUTPUT]
・[Buzzer OFF]
・Read
・Write
・Cancel
42
Reads the current value of cumulative irradiation time from the UJ35 controller into the PC.
Uploads the current cumulative irradiation time from the PC to the UJ35 controller.
Cancels the current cumulative irradiation time setting operation and reverts to
the original settings.
Switches head temperature display between °C/°F.
Switches external output signals between READY/BUSY.
Switches the buzzer ON/OFF for each operation.
Reads the MODE settings from the UJ35 controller into the PC.
Uploads the MODE settings from the PC to the UJ35 controller.
Cancels the current MODE setting operation and reverts to
the original settings.