Panasonic UJ30 Series User Manual page 15

●Front
(1) EMISSION switch
(9) Display unit
(8) Operation switch
(7) UV check switch
(only UJ35)
(6) UV sensor
connection port (only UJ35)
● Rear
(13) CH1-CH4 LED head
connecting connector
(14) Protective seal
(12) AC adapter connector
Description
(1) EMISSION switch
(2) READY indicator
(3) CH1-CH4
operation switch
(4) CH1-CH4
selector/indicator
(5) Key operated
power switch
(6) UV sensor
connection port
(7) UV check button
(8) Operation unit switch
(9) Display unit
(10) Input/output terminal
block
(11) RS232C connector
(12) AC adapter connector
(13) CH1-CH4 head
connecting connector
(14) Protective seal
Function
UV is irradiated and stopped by selected irradiating CH head. Red lamp is turned on
during UV irradiation.
Indicates that UV irradiation is enabled (ready to start).
Selects the LED head channels for irradiation.
Red = irradiation, green = standby, yellow = error
Commences/finishes operation of the controller.
Connects the special UV sensor.
Views/calibrates values measured by the special UV sensor
Specifies irradiation conditions (intensity and time), replacement time settings, and
initial values, and switches the display.
Displays irradiation conditions (intensity and time), replacement time settings, head
temperature, and initial values.
Connects a PLC, foot switch, or other external device
Connects a PC, PLC, or other external device with RS232C.
Connects the special AC adapter.
Cconnects LED heads.
Protects connectors.
Part names and functions
(2) READY indicator
(3) CH1-CH4 operation switch
(4) CH1-CH4 selector/indicator
(5) Key operated power switch
(10) Input/Output terminal block
(11) RS232C connector
(only UJ35)
Remark
UJ35 only
UJ35 only
UJ35 only
5