400
Outside Line Connection Assignment
Description
Selection
Default
Programming
Conditions
Feature References
4-94
System Programming
4.6
Outside Line Programming
Used to identify the outside lines which are connected to the
system. This prevents users from originating a call to a line which
is not connected.
• Outside line (CO) number: 1 through 3,
• Connect / No Connect
All outside lines – Connect
1.
Enter 400.
Display: 400 CO CONNECT
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter outside line number 1, you can also press NEXT.
Display example: CO1:Connect
4.
Keep pressing SELECT until the desired selection is
displayed.
5.
Press STORE.
6.
To program another outside line, press NEXT or PREV, or
SELECT and the desired outside line number.
7.
Repeat steps 4 through 6.
8.
Press END.
• To assign all outside lines to one selection, press the
In this case, the display shows the contents programmed for outside line
1.
Section 3, Features
Outside Line Connection Assignment
( =all outside lines)
key in step 3.