504
Description
Selection
Default
Programming
Conditions
Feature References
4-114
System Programming
4.7
Call Forwarding to Outside Line
This program determines which Classes of Services (COS) are
allowed to perform the Call Forwarding to Outside Line function.
• COS number: 1 through 8,
• Disable / Enable
All COS – Disable
1.
Enter 504.
Display: 504 CALL FWD CO
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4.
Keep pressing SELECT until the desired selection is
displayed.
5.
Press STORE.
6.
To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7.
Repeat steps 4 through 6.
8.
Press END.
• To assign all COS to one selection, press the
case, the display shows the contents programmed for COS 1.
• Program [601] "Class of Service" is used to assign a Class of Service to
each extension.
Section 3, Features
Call Forwarding – to Outside Line
COS Programming
( =all COS)
key in step 3. In this