4.3
System Programming
Description
Selection
Default
Programming
Conditions
Feature Reference
User Password
Assigns the password required for entering the User Programming
mode.
In the User Programming Mode, any display digital proprietary
telephone user in the system can set the following programs:
[000] Date and Time Set
[001] System Speed Dialing Number Set
[002] System Speed Dialing Name Set
[003] Extension Number Set
[004] Extension Name Set
[005] Flexible CO Button Assignment
[006] Operator/Manager Extension Assignment
[008] Absent Messages
[009] Quick Dial Number Set
Password: 4 through 7 digits
1234
1.
Enter 120.
Display: 120 USR PASSWORD
2.
Press NEXT.
Display example: Password:1234
3.
Enter a password.
To change the current entry, press CLEAR and enter the new
password.
4.
Press STORE.
5.
Press END.
• The password can be from four to seven digits long. Valid numbers are
from 0 to 9.
• If less than four digits are entered, they will not be stored.
• You cannot leave the entry empty.
Section 3, Features
User Programming (Manager Programming)
System Programming
120
4-53