Cos Programming; Toll Restriction Level — Day / Night - Panasonic KX-TD308 Installation Manual

4.7

COS Programming

Toll Restriction Level — Day / Night
Description
Selection
Default
Programming
Conditions
Feature References
Each extension must be assigned a Class of Service (COS). These
programs set the toll restriction value for each COS in day or night
mode.
• COS number: 1 through 8,
• Level number: 1 through 8
COS 1 through 7 – Level 1 — Day / Night;
COS 8 – Level 7 — Day / Night
1. Enter a program address (500 for day or 501 for night).
Display example: 500 TRS DAY LVL
2. Press NEXT.
Display: COS NO?
3. Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:1
4. Enter a level number.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all COS to one selection, press the
case, the display shows the contents programmed for COS 1.
• Program [601] "Class of Service" is used to assign a Class of Service to
each extension.
Section 3, Features
Night Service
500-501
( =all COS)
key in step 3. In this
Toll Restriction
System Programming 4-111