Panasonic KX-T336 System Reference Manual page 59

9.00 READ
Description
This function enables you to copy the desired
system programming data from specified screen
into the
currety
displayed screen quickly.
This is available in the screens where READ is
displayed in the function field.
Operation
<Example>
Copying the system programming data of "Class
of Service (COS) No.=Ol" into "COS No.=32."
The current screen is Class of Service (COS)
No.=32.
I
System-Class of Service
I
I--~
Class of
Service (COS) No. = 32 (l/2)
I
Conditions
1. Press F4.
F4
lE!l
I
READ>COS No.
(01-32)= 0
I
2. Enter the COS number 01 to copied.
READXOS No.
(01.32)=01 j j
3. Press the RETURN key. RETURN
L
I
System-Class of Service
Class of Service (COS) No. = 32 (l/2)
j~~~~fNo;-32J;HH g /+ ,z 1
l
The message below appears when the
stored data of COS No.=01 is copied
properly to COS No.=32.
*****OK
To repeat "READ" operation, repeat from step 2.
When READ operation is unsuccessful, one of the
following error messages appears on the screen:
Error message types depend on the situation.
l
**** Error : Illegal parameter
l
**** Error : Not installed
For details about the error messages, refer to
Section 9-M "Error Message Tables."
To store the copied data, press PF4 or PF2.
To conclude this mode, press the EXIT (F7) key.
Reference
The READ functicrl is available in the screens
listed below. For the input values, refer to Section
9 "System Programming (VT)."
l
System-Class of Service (l/2) (2/2)
- Group-Trunk Group (l/2) (2!2)
. Trunk-CO Line
l
Extension-Station (l/3) (2/3) (3/3)
* Extension-DSS Console (l/3) (2/3) (3/3)
. Automatic Route Selection-Route Plan Tables
7-J-l 6