Panasonic KX-T336 System Reference Manual page 430

A. Introduction
Description
Conditions
This section provides information for the If the programming data of your PITS is already
programming of various features unique to each accessed by another administration device, the
PITS telephone and DSS console in PITS station following message appears on the display:
programming mode.
) Already Accessed
The assignable features are:
1) Assigning DN (Directory Number) Buttons
2) Assigning PF (Programmable Feature)
Buttons on PITS and DSS console
3) Assigning DSS (Direct Station Selection)
Buttons on PITS and DSS console
4) Automatic Line Hunting (Calling) Selection
5) Automatic Answering Selection
6) Call Waiting Tone Selection
7) Confirmation of Directory Number/Port
Number
8) PITS Automatic Test
Note:
The assignment of PF and DSS buttons on the
DSS console can be done using the
associated PITS telephone.
In the programming procedures described in
Section 12-C-2.00 "PF Button Assignmenr
and 12-C-3.00 "DSS Button Assignment,"
press a PF or DSS button on the DSS console
instead of pressing a PF or DSS button on the
PITS telephone.
Refer to Section 4-B-2.00 "Assignable Feature
Buttons" for further information about features
assignable to DN buttons, PF buttons and
DSS buttons.
PITS station programming can be done at any
extension simultaneously.
Be sure the handset is on the cradle and the SP-
PHONE button is off. If it is off-hook or the
speaker-phone is on, PITS programming mode is
not established even if the MEMORY switch is
set to the "PROGRAM" side.
12-A-1