<Example>
To change the
name of speed code from 001 through
099 to Panasonic,
enter :
SPD > SET O*/Panasonic
Displayed
Message
r
Displayed Message
+w++x Error: illegal main command
+H+W Error: Illegal sub command
M
Set complete
=
Error: Input data do not exist
-+-
Error: Set deny (speed dial
number=001 -200)
++-+ Total 3 entries
Meaning
There is an error in the main command.
There is an error in the sub command.
Data has been stored or changed.
Entered data does not exist.
Entered speed dial code is out of the range
of 001 to 200
There are three entries to be stored or
changed.
i
13-C-6