Remote-Controlling Externally Connected Devices <Mode Out Control Function - Mitsubishi Electric DX-PC55E Operation Manual

4.17 Remote-controlling externally connected devices <MODE OUT control
function>
Use this function to remote-control externally connected devices. Click the MODE OUT button on the camera
window panel ( see 3.7 on page 12) to display the following Mode Out Control panel.
When the MODE OUT setting of the recorder is set to LAN, the buttons at the right become usable. Click these
buttons to change the properties of the MODE OUT terminals on the rear of the recorder. The indicators at the
right are off by default.
Name and IP address of the
currently accessed recorder
Channel number and name of
the currently displayed camera
To switch the camera, select
other camera from the drop-
down list.
To change the button name, right-click the button to display the following dialog box. The number of characters you
can enter is limited.
While this function is used, live viewing and playback of the recorded images of the recorder are automatically
suspended.
– 36 –
MODE OUT button
You can change the picture
quality and decode level by
right-clicking within the image
field.