Table of Contents
Advertisement
Then, execute the alarm list search. To execute the alarm list search, use any of three methods as follows:
• Select a row in the list and click the [Search] button.
• Select a row in the list and double-click on it.
• Select an alarm recording event shown in the alarm distribution bar while checking the alarm numbers, and then
click on the event. (See below.)
Under the alarm distribution bar, the start and end dates and times of the alarm list are displayed. Alarm recording
events are represented by green lines in the bar. When you move the cursor to a green line representing an alarm
recording event, its alarm number is displayed.
When you right-click on an area dense with green lines in the alarm distribution bar, the following menu will
appear. Select [Details] to magnify the area you clicked. Select [Wide] to cancel the magnified display.
4.7.3
Searching using bookmarks <Bookmark search>
You can search using the bookmark list. Select the [Bookmark Search] tab on the Search window.
Select a searched device and click the [Search] button.
Bookmark list
Click a column heading to sort
Select a row in the list and
double-click on it to start search.
The bookmark list is retained in this software. Even when the communication is interrupted, the bookmark list
remains unchanged and is used as it is in the next bookmark search unless you modify the network data such as
recorder registration data.
For the procedure to register a bookmark,
4.7.4
Searching the protect data area <Protect data list search>
You can search data blocks protected in DX-TL5000 series or other recorders. Select the [Protect Data List
Search] tab on the Search window.
Select a searched device and click the [Refresh] button. The protect data list is loaded. Then, click the [Search]
button or double-click on the protect data list to execute search.
Protect data list
Click a column heading to
sort the list.
Select a row in the list and
double-click on it to start
search.
The protect data list is retained by the recorder. When the search is executed, the image at the head of the protect
data area is displayed.
Notice
• For the procedure to register protect data, see the operation manual of the recorder.
the list.
see 4.10.6 on page 28.
– 22 –
Select a searched device.
[Search] button
Click to save the bookmark list in a
text format.
Click to delete the currently
selected list.
Select a searched device.
[Search] button
[Refresh] button
Click to save the protect data
list in a text format.
Click to search for the next or
previous protect data in the list.
Advertisement
Table of Contents
